Single range |
0-20.00; 200.0; 2000uS/cm OR
0-20.00; 200.OmS/cm |
Resolution |
0.01 OR 0.1 Digit |
Accuracy |
+/-1 Digit Of F.S. |
Dual Display |
Upper For Conductivity (Red LED) & Lower For Control Setting (Red LED) |
Calibration |
Single point manual Calibration (KCL Based) |
Calibration Slop |
+/- 30% Of Display Reading |
Cell Constant |
1.0 Cell Constant; +/- 10% with 1/2" BSP Threading |
Current Output |
4 to 20mA DC; Fully Isolated (Optional At Extra Cost) |
Relay Output |
One Changeover Relay Potential Free Contact of 5Amp |
Control Setting |
Two Set Point with High & Low Value Setting |
Power Supply |
230VAC; +/- 10%, 5011.s single phase |
Environment |
5 to 50°C |
Dimension |
96x96x65mm (Gray ABS Cabinet) |
Weight |
400 grams for Inst. Only (Approx.) |